ICMME-2020 Conference

Department of Mechanical Engineering under the aegis of NITJ is organizing 2nd International Conference on Mechanical and Materials Engineering (ICMME) from July 14-15, 2020. The 1st International Conference was successfully held from 11-12 June 2019 at NITJ. The present conference aims at providing a leading forum for sharing original research contributions and practical developments in the field of Mechanical and Materials Science and Engineering so as to contribute its share for technological advancements. Globalization provides all around development and this development is impossible without technological contributions. Hence, the present conference aims at providing a leading forum for sharing original research contributions and practical developments in the field of Materials so as to contribute its share for technological advancements.

Dr. B. R. Ambedkar National Institute of Technology, Jalandhar

The Institute is named after Bharat Ratan Dr B. R. Ambedkar, founder of Indian Constitution. The institute came into existence in the year 1988 as Regional Engineering College on a beautiful campus of about 154 acres close to the heart of Jalandhar city. The institute obtained the status “Institute of National Importance” by Act of Parliament in 2007. The institute is located on the G.T Road Amritsar bye-pass at a distance of 15 km from Jalandhar Bus Stand, 12 km from Jalandhar City Railway Station, and 18 km from Jalandhar Cantt. railway station. The institute is well connected to the National Capital through rail and road link.

Department of Mechanical Engineering

The Department of Mechanical engineering was founded in 1990 and has grown as one of the dynamic departments of the Institute over the last three decades. The department offers B Tech, M Tech and PhD programmes. The B.Tech program is accredited by the NBA.

Call for Papers/Posters

The organizers invite papers from students, teachers, scientists and researchers in academia and industry to present the results of their research and development efforts in the field of  Materials Science and Engineering. Papers must report original academic or industrial research in any of the following topics not limited to but relevant to the conference.

Track – 01:

Composite Materials

•    Polymer composites

•    Ceramic & Metal Matrix Composites

•    Green Composites

•    Fibrous & Particulate Composites

•    Hybrid composites

•    Self-healing Composites

•    Micro & Nano Composites

•    Nano-Mechanics & Nano-Electronics

•    FEM Modeling of Materials

•    Density Functional Theory Analysis

•    Monte-Carlo Technique

•    Meso-scale Modeling

•    Molecular Dynamics Modeling of Materials

Track – 02:

Thermal and fluid engineering

•    Nanofluids

•    Renewable energy

•    Refrigeration

•    Fluid dynamics

•    Modeling and simulation of nanofluids

•    Alternative fuels

•    Thermal comfort

•    Building Energy Efficiency

•    Energy Simulations

•    Sustainable Buildings

•    Computational Fluid Dynamics

•    MEMS Design and Microchannel Cooling

•    Optimization in Thermal Devices and Energy Management

Track – 03:

Metals, Ceramics, Polymers, Bio-Materials

•    Manufacturing of Metal, Polymer, Ceramic Based Materials

•    Materials for Green Technology

•    Tribology and Surface Engineering

•    Heat Treatment

•    Solidification, Processing & Corrosion

•    Powder Metallurgy

•    Additive Manufacturing

•    3-D Printing

•    Welding

Track – 04:

Mechanical Properties

•   Fracture & Damage

•   Fatigue

•   Dynamic Fracture

•   Dynamic Behavior

•   Wear

•   Interfaces/Interphases

•   Creep

•   Effect of Aggressive Environment

•   Stress-Strain Behavior

•   Strain-Rate Dependence

•   Young’s Modulus, Tensile Strength, Poisson’s Ratio and Other Properties

Author Guidelines

The presenters should submit an abstract of approximately 300 words withTimes New Roman, 12 point, fonts in Windows-based Microsoft Word (.doc /.docx) document through the following easy chair link: https://easychair.org/conferences/?conf=icmme20200 and also by attaching an e-mail to icmme2020@nitj.ac.in by mentioning the Track No. and Type of Presentation (i.e., Oral) in the mail subject with other relevant details. The abstract shall be reviewed by a peer committee. Selected manuscripts will be accepted for oral presentation. After the acceptance of the abstract, the authors are required to submit the full paper again through the same link of easy chair. All the templates and detailed guidelines are available at website (http://nitj.ac.in/icmme2020). All the presented papers will be published in Scopus Indexed Journal titled American Institute of Physics Conference Proceedings (AIP Conf. Proc.).

Registration Fees

 At least one author of each accepted paper must register by June 14th, 2020 in order for the paper to be included in the proceedings. Student registrations are only acceptable if first author of the paper is a full-time student at an Institution.

Registration Details

The registration fees for attending the conference:

Participants from Industry

INR 10000

Participants from Academia

INR 8000

Student Participants

INR 6000

Attendee Only

Students from Abroad

INR 2000

USD 150

Academia from Abroad

USD 300

Important Dates

Abstract Submission Ends

March 14, 2020


Acceptance of Abstract/

Paper Submission Starts


Paper Submission Ends

April 30, 2020


May 14, 2020

Acceptance of Paper/

May 30, 2020


Author Registration Starts


Author Registration Ends

June 14, 2020

Organizing Committee


Chief Patron:  Prof. L.K. Awasthi, Director, NIT Jalandhar

Patron:  Dr. D.K.Shukla, HOD (ME), NIT Jalandhar

Conference Chair:  Dr. Pramod Kumar, Dr. Rajeev Kukreja, Dr. Dinesh Kumar Shukla, Dr. Subhash Chander

Conference Co-Chair:  Dr. Anand Vaz, Dr. S K Tiwari, Dr. R S Bharj, Dr. Raman Bedi, Dr. T Srinivas, Dr. Ajay Trehan

Organizing Secretary:    Dr. Sumit Sharma/

                                               Dr. Manoj Kumar

Joint Secretary: Dr. S S Sandhu, Dr. Ranchan Chauhan, Dr. Dwesh K. Singh, Dr. Rajan Kumar, Dr. Nitin Sharma, Dr. Saurabh Kango, Dr. Satyender Singh, Dr. Sanjay, Dr. Ashok K. Bagha


National Advisory Committee

  • S. P. Singh, IIT Delhi
  • Navin Kumar, IIT Ropar
  • Puneet Mahajan, IIT Delhi
  • P.V. Rao, IIT Delhi
  • R. K. Pandey, IIT Delhi
  • A.K. Darpe, IIT Delhi
  • S.V. Modak, IIT Delhi
  • D.P. Mishra, IIT Kanpur
  • S.K. Mishra, CEO, Brahmos, DRDO
  • P.M. Padole, NIT Nagpur
  • B. Karunakaran, IITB, Mumbai
  • K. Ramesh Babu, IITM, Chennai
  • K. Sankaranarayana Samy, NIT Tiruchirappalli


International Advisory Committee

  • Prakash Srirangam, University of Warwick, U.K.
  • Tuan Anh Nguyen, Vietnam Academy of Science and Technology


Accommodation Guidelines

Delegates will be provided suitable accommodation in the Institute. This accommodation is limited and will be available to registered participants on a first come first served basis. Accommodation charges will be borne by the delegates. For student delegates, accommodation will be provided at hostels on campus at nominal charges.

Address for Communication

Dr. Sumit Sharma/Dr. Manoj Kumar,

Organizing Secretary, ICMME 2020

Department of Mechanical Engineering,

Dr B R Ambedkar National Institute of Technology Jalandhar, Punjab -144011

Phone: +91 –2690301/02, Ext: 3106
Mobile: +91-8146871758, +91-9793557548
Fax: +91 - 2690320
Email: sharmas@nitj.ac.in, kumarm@nitj.ac.in



Payment of Fees:

DD in favour of “ICMME 2020 Conferencepayable at Jalandhar                  or    

Bank Transfer - Account Number: (will be provided soon)

State Bank of India, REC Jalandhar (Branch Code: 50841)

IFSC Code: SBIN0050841    


MICR Code: 144002065

For further details, please visit the conference website:http://nitj.ac.in/icmme2020


1st International Conference on Materials Science & Engineering, 11-12 June 2019


We request you to have a regular watch on our Conference website for updates.




JULY 14-15, 2020






Organized by:

Department of Mechanical Engineering

Dr B R Ambedkar National Institute of Technology



Votes: 0
E-mail me when people leave their comments –

You need to be a member of The International NanoScience Community - Nanopaprika.eu to add comments!

Join The International NanoScience Community - Nanopaprika.eu


Rafael Zadorosny is now a member of The International NanoScience Community - Nanopaprika.eu
Dr. Ghanshyam Barman updated their profile
Ashok Vaseashta, Prof. Dr. posted a blog post
Feb 21
Kinjal Shah is now a member of The International NanoScience Community - Nanopaprika.eu
Feb 18