SouthWest NanoTechnologies Announces New Specialty Multi-Wall Carbon Nanotubes for Conductive Polymers

NORMAN, OK -- June 13, 2012 -- SouthWest NanoTechnologies (SWeNT) has developed two new grades in its SMW™ line of Specialty Multi-wall CNT. These materials are used as additives that enable higher electrical conductivity in polymer compounds and improved cathode performance in Lithium Ion batteries.

 

The new grades, SMW200 and SMW210 have demonstrated the greatest ease of dispersions and lowest percolation threshold of any MWCNT product in multiple customer thermoplastic compound evaluations. This enables ESD (electrostatic discharge) performance at lower filler loadings than either Carbon Black or other Multi-wall CNT, in a variety of polymers. This low percolation threshold minimizes the degradation of physical properties of the polymer, a common problem in heavily loaded compounds, and higher conductivity at comparable loading broadens the range of applications for conductive polymer compounds.

 

Both materials are synthesized by the CoMoCAT® method, widely recognized as producing the most consistent CNT products, and for its scalability. Both materials disperse easily into most polymers and have the same ultra-pure, defect-free, less entangled CNT.

 

SMW200 is a "purified" grade, with CNT purity of 96%+ (even higher purity research grades are available upon special request). SMW210 is an "as produced" grade, with CNT purity of 70%+, with the balance being mainly metal oxides used in the catalyst.

 

Because post-synthesis purification is not done for SMW210, the pricing is much lower.SMW210 has a hybrid structure with metal-oxide particles attached to the CNT, improving dispersion still further, at a much lower cost. In thermoplastic compounds, there is little performance difference between SMW200 and SMW210 with respect to ease of dispersion, conductivity and percolation, with most customers choosing SMW210 due to lower cost.

 

SMW200 has also been demonstrated as a Carbon Black replacement in Lithium Ion battery cathodes. Very low loadings (1 wt %) of SWM200 have resulted in doubled cycle life, higher capacity, lower heat build-up and better low temperature performance.

 

"We have already generated a great deal of customer interest in these materials, and resulting demand is driving us to increase capacity," says SWeNT CEO David Arthur. "We have just shipped our first 100 kg of SMW210 for a customer's full-scale qualification trial for a high-volume conductive polymer application. Also, several Li-ion battery manufacturers are testing SMW200 now (this higher purity grade may be required for certain applications like batteries). To meet anticipated demand in 2013, SWeNT is adding capacity of multiple tonnes per month."

 

For a 13-page summary report on the performance of SMW200 in Li-ion batteries, for data on conductivity in thermoplastics, or for published reports on conductive polymer applications contact us at info@swentnano.com.

 

About SWeNT:

SouthWest NanoTechnologies (SWeNT) is a privately-held advanced materials company that manufactures high-quality Single-Wall and Specialty Multi-Wall carbon nanotube products in a variety of forms, including powders, pastes, dispersions and inks for a wide range of applications in the electronics and composites industries. SWeNT was founded in 2001 and has established commercial-scale manufacturing operations in Norman, OK and a business & applications development center in the Boston, MA area. For more information, please visit www.swentnano.com.  

Views: 18

Tags: nanotube

Comment

You need to be a member of The International NanoScience Community to add comments!

Join The International NanoScience Community

Next partner events of TINC

We are Media Partner of:

Welcome - about us

Welcome! Nanopaprika was cooked up by Hungarian chemistry PhD student in 2007. The main idea was to create something more personal than the other nano networks already on the Internet. Community is open to everyone from post-doctorial researchers and professors to students everywhere.

There is only one important assumption: you have to be interested in nano!

Nanopaprika is always looking for new partners, if you have any idea, contact me at editor@nanopaprika.eu

Dr. András Paszternák, founder of Nanopaprika

Publications by A. Paszternák:

The potential use of cellophane test strips for the quick determination of food colours

pH and CO2 Sensing by Curcumin-Coloured Cellophane Test Strip

Polymeric Honeycombs Decorated by Nickel Nanoparticles

Directed Deposition of Nickel Nanoparticles Using Self-Assembled Organic Template,

Organometallic deposition of ultrasmooth nanoscale Ni film,

Zigzag-shaped nickel nanowires via organometallic template-free route

Surface analytical characterization of passive iron surface modified by alkyl-phosphonic acid layers

Atomic Force Microscopy Studies of Alkyl-Phosphonate SAMs on Mica

Amorphous iron formation due to low energy heavy ion implantation in evaporated 57Fe thin films

Surface modification of passive iron by alkylphosphonic acid layers

Formation and structure of alkylphosphonic acid layers on passive iron

Structure of the nonionic surfactant triethoxy monooctylether C8E3 adsorbed at the free water surface, as seen from surface tension measurements and Monte Carlo simulations